[TowerTalk] 90 degree coax bend atop a crankup tower

[James C. Hall, MD]

That's what I do - Kellum grips on all cables, tape together, and they all
share the load.

73, Jamie
WB4YDL

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
Richard (Rick) Karlquist
Sent: Friday, June 05, 2015 9:40 AM
To: Patrick Greenlee; towertalk at contesting.com
Subject: Re: [TowerTalk] 90 degree coax bend atop a crankup tower



On 6/5/2015 7:20 AM, Patrick Greenlee wrote:
educe damage to the coax.
>
> I haven't done/tried the following but solicit comments from those who
> have:
>
> Use a large radius of curvature 90 degree section of conduit to 
> increase the area of contact between the coax and conduit.  Use an 
> adhesive (spray adhesive sold for attaching auto trim or other good 
> adhesive) to

why go to all this trouble when you can use a Kellems grip to hold the coax?

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk