[TowerTalk] Homebrew tower...

[Douglas Ruz]

Hello everybody !!!.

Thank you very much for all ideas !!!...it is amazing...i am learning a lot.

Let me try give more information to all of you.

FIRST, Bryan, WA7PRC, you are absolutely RIGHT..."Reinvent the wheel" is a trouble but i have not other choice...

Gerald, K5GW, yes i can get guy wires from electric power company...so, guy wires are not a problem.

Jim Lux, sorry, i have not a lot of pipes and ground space, so, self supporting is not possible. Guyed tower is my choice.

Rick, N6RK, yes, i am talking about 3/4 inch galvanized water pipe.

I am not the welder...I have been talking with the welder and he knows it is dangerous welding galvanized parts but he work in OPEN SPACE with a FAN to remove all gases.
He is also thinking use a CONTACT SOLDERING MACHINE and not a classic ELECTRIC SOLDERING MACHINE...less gases.

To join sections i found that using a piece of 1 inch water pipe, after "cleaning" the inside with a drill work perfect. Using bolts in both sides to join each section. 

I am WORRY about TWO THINGS:

TOWER STRENGHT: Is strong enought the 3/4 inch water pipe and 5/16 bars for braces to replicate a Rohn 25G ??

CORROSION: Heat during welding destroy galvanized protection...i can not galvanized after welding...maybe some cold galvanizing is possible...I am worry about corrosion...maybe painting inmediately after soldering minimize corrosion.

I am listening (READING).

Thanks,

73...Doug, CO8DM
"No creo que haya alguna emoción más intensa para un inventor que ver alguna de sus creaciones funcionando. Esa emoción hace que uno se olvide de comer, de dormir, de todo." - Nikola Tesla
  ----- Original Message ----- 
  From: Bryan Swadener 
  To: co8dm at frcuba.co.cu 
  Sent: Saturday, June 27, 2015 2:14 AM
  Subject: Re: [TowerTalk] Homebrew tower...


  Hi Douglas,


  IMO, it's too much trouble to "reinvent the wheel". You need to be not only the fabricator but also, structural engineer. Then, after you've designed and fabricated the parts, you'll want to hot-dip galvanize the parts so they'll last a long time.  Just save your money to buy what you want. I did exactly that.


  vy 73 es gl,
  Bryan WA7PRC
  http://www.tinyurl.com/wa7prc-tower



    Date: Fri, 26 Jun 2015 11:50:40 -0400
    From: "Douglas Ruz" <co8dm at frcuba.co.cu>
    To: <towertalk at contesting.com>
    Subject: [TowerTalk] Homebrew tower...

    Hello,

    I would like a tower in my property but i can not buy a Rohn or any other tower, so, I WILL BUILD ONE...or will try build one.

    I have many galvanized tubes, 7 ft long, 1 1/32 inch diameter and 1/8 inch wall.

    I have been reading dimensions of Rohn 25G and 45G...i like 25G.

    My goals are:  
    -Reach about 50 ft high.
    -Install a rotator.
    -Install a lightweight tribander yagi (maybe an spiderbeam), a 6m yagi (5 elem) and maybe 2 elem moxon for 40m...I know 50ft is not OK for a 40m antenna but my anchor points are to close, so, i can not install a higher tower.

    I have another important questions...it is about GUY LINES...what is the cheapest guy line solution ???

    73....Douglas, CO8DM