[TowerTalk] Brake Winches
Wayne Kline
w3ea at hotmail.com
Mon Jun 29 11:34:41 EDT 2015
The common brake winch has a wheel / drum attached to the high gear shaft. it positioned out side the main frame.
there is a lever with a steel band that encompasses that wheel drum. and when lowering the winch and having the gear dog lock disengaged ( no click click click) you use the leaver to control the unspooling of the winch.
some models had a friction material bonded to this band some where just steel to steel.
My one winch is the steel to steel and I spray it with WD40 b-4 lowering to minimize wear.
Wayne W3EA
> From: infomet at embarqmail.com
> To: towertalk at contesting.com
> Date: Mon, 29 Jun 2015 11:10:39 -0400
> Subject: [TowerTalk] Brake Winches
>
> Would someone please explain how brake winches work?
> I want to use one as a tilt winch on a 40’ Rohn 25G tower.
> The tower is bracketed to my chimney and the tilt load obviously drops to nil as the tower gets to vertical.
> So what happens when the load gets below the minimum’ value in the spec’s??
> Wilson
> W4BOH
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list