[TowerTalk] Commscope SFX-500 cnnectors

[mike stokes]

Nothing wrong with using N conectors, I was hoping to find a solution
cheaper than the $20 to $25 purchased N connecters.

But that may be the way I have to go.

Mike
 On May 24, 2015 2:18 PM, <john at kk9a.com> wrote:

> What is wrong with using purchased N connectors?  I used them on my LDF6
> and
> LDF7 with no issues.
>
> John KK9A
>
>
> To:     "Tower and HF antenna construction topics."
> <towertalk at contesting.com>
> Subject:        [TowerTalk] Commscope SFX-500 cnnectors
> From:   mike stokes <mike9v at gmail.com>
> Date:   Sun, 24 May 2015 12:14:07 -0400
>
> I recently picked up some Commscope SFX-500  and the specs seem to be
> decent.  I can buy N connectors but need to homebrew connectors with either
> a PL-259 or SO-239 for HF use .
>
>
>
> I have made many homebrew connectors for the standard .5 and .75 inch
> hardline using compression fittings but am having issues finding the right
> sized material for this feedline.
>
>
>
> The outside aluminum jacket is .396 inch diameter and the center conductor
> is .14 inch diameter. The outer jacket is almost small enough that I can
> screw on a PL-259 but the center conductor is to large for the center pin
> of the PL-259.
>
>
>
> I appreciate any thoughts or ideas you may have.
>
>
>
> Thanks in advance.
>
>
> --
> Mike Stokes
> KK9V
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>