[TowerTalk] Fwd: Fwd: sealing PL259's

Patrick Greenlee patrick_g at windstream.net
Thu May 28 14:46:57 EDT 2015


A good wrap of electrical tape lasts pretty well and can be built up 
pretty easy just in case you have tape  but not the right size of shrink.

Patrick   NJ5G.

On 5/27/2015 10:08 AM, Doug Renwick wrote:
> Roger try putting some thick walled heat shrink over the jaws like 3/4" and
> shrink it down.  Yes it needs to be replaced every so often but it sure
> protects the connector shell.
>
> Doug
>
> I wasn't born in Saskatchewan, but I got here as soon as I could.
>
> -----Original Message-----
>
> Use a thin sheet of  Silicone rubber in a "U" shape inside the pliers to
> protect the connectors.  It works for me, but I'm often too impatient to
> worry about a cheap PL-259 (Even Silver plated Amphenols are cheap)
> BNCs are basically miniature N connectors, bur they lose a lot to scale
> and are very weak.  I've never seen them used outdoors.  It tales little
> strength to pull the coax out of one, making them an interconnect only
> for me.
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list