[TowerTalk] Clamp on thrust bearing
Jorge Diez - CX6VM
cx6vm.jorge at gmail.com
Sun Nov 1 12:52:15 EST 2015
I have a 40-2CD and a 6 element monobander on same mast, not easy to remove
and play with it
I think a thrust bearing inside the tower or the first idea from Patrick
will work for now
Thanks all for the help
73,
Jorge
-----Mensaje original-----
De: TowerTalk [mailto:towertalk-bounces at contesting.com] En nombre de
jcjacobsen at q.com
Enviado el: domingo, 01 de noviembre de 2015 12:47 p.m.
Para: towertalk at contesting.com
Asunto: Re: [TowerTalk] Clamp on thrust bearing
Ummmmmmmmmmmmm
<SNIP>
You might try loosening the Yagi mounting clamps and let them slide down the
mast to the top of the tower. Then slide the mast up using a gin pole until
you can insert the bearing. Then let the mast down and re-mount the beams. I
think you will be much happier with a proper bearing.
<Snip>
Let's think about that........ You slide the yagi down to the top of the
tower. Then raise the mast to insert the new bearing.
This would mean the mast AND yagi would be above the top of the tower. What
would support the mast and yagi while the mast is out of the tower??? Nope,
don't think so.
I like the idea of raising the mast out of the rotor just enough so you can
place the bearing on the bottom of top plate. It would be easier to keep the
mast braced vertical while doing it.... not to mention stable.
Just my $.02 worth.
K9WN Jake
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
---
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
https://www.avast.com/antivirus
More information about the TowerTalk
mailing list