[TowerTalk] Ameritron remote coax switch ?
Bob K6UJ
k6uj at pacbell.net
Mon Apr 18 12:14:04 EDT 2016
Jim,
Would it be possible to replace the relays in the RCS-4 with vacuum relays ?
Probably not enough room ?
Bob
K6UJ
On 4/18/16 6:22 AM, Jim Thomson wrote:
> Date: Sun, 17 Apr 2016 06:40:04 -0500
> From: 'DGB' <ns9i2016 at Bayland.net>
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] Ameritron remote coax switch ?
>
> I have three RCS-4. Thru the coax switching, never a failure in 4 yrs
> with legal limit. Really nice not having to run control cables. one is
> 250 ft. from the shack.
>
> 73 Dwight NS9I
>
> ## IF you DON’T require a 2 x 6 switch, like the array solutions 6 pack,
> and only require something like a 1 in and 4-10 out switch, this can easily be done
> via relays...and by using a SPDT type, will ensure that all the un-used ants are grounded.
>
> ## To make them a lot more reliable, use DPDT relays, with contacts in parallel.
> That will double the current rating, quadruple the power rating, and provide for
> redundant contacts. Ok, now you can safely install the remote switch box at the top
> of the tower.....and save on coax.
>
> ## another option is to use ceramic vac relays. If its just 2 x ants you want to toggle between,
> say 2 x yagis...a single SPDT will work just fine...but will not allow for the unused ants to be grounded.
>
> ## To do that, a SPDT vac relay could be used, one for each port. Vac relays work great for this application.
> You never have issues with contacts going open etc, extremely reliable.
>
> Jim VE7RF
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list