[TowerTalk] Lifting a mast off the rotator

N5KM - Kris n5kilomike at gmail.com
Mon Apr 25 11:09:23 EDT 2016


I use a small automotive hydraulic jack. Place the jack under the rotator.
Loosen the mast thrust bearing(s) and rotator shelf u-bolts. Jack
everything up the required amount then tighten the thrust bearing(s).
Lower the jack. The centering block is now accessible.

Do the above in reverse order to put everything back.

Kris N5KM


More information about the TowerTalk mailing list