[TowerTalk] Rotator and Beam advice requested
Roger (K8RI) on TT
K8RI-on-TowerTalk at tm.net
Sat Aug 20 19:54:04 EDT 2016
They do and retracting the tape would only reduce the element weight
"out there" a liyyle.
The factory saying that? Might not have been an engineer
73
Roger (K8RI)
On 8/19/2016 Friday 9:19 PM, Stan Stockton wrote:
> I thought a StepIR had some kind of conductive flexible tape on inside of fiberglass. If so, what's up with retracting elements to reduce wind load?
>
> Stan, K5GO
>
> Sent from Stan's IPhone
>
>
>
>> On Aug 19, 2016, at 7:44 PM, Chris Hoelzle <choelzle at cox.net> wrote:
>>
>> Hello All. I am putting up a 80 foot Rohn 55G. I am in a 115 mph wind zone.
>>
>>
>>
>> I need Beam advice - I have just about settled on a StepIR DB36. Even though
>> the specs show 100 mph for the beam, in talking to the factory, I am told
>> "it will be fine" as long as you retract the elements in high wind. Is that
>> true or should I go a different direction?
>>
>>
>>
>> I like the simplicity of the StepIR as my alternative will be multiple beams
>> and ring rotators and all that fun.
>>
>>
>>
>> Second question - Assuming I go with the 55G and the DB36, can anyone guide
>> me to a good reliable rotator that I won't have to rebuild every year.
>>
>>
>>
>> Thanks so much
>>
>>
>>
>> NN6CH
>>
>> Chris Hoelzle
>> choelzle at cox.net
>> Laguna Niguel, CA
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the TowerTalk
mailing list