[TowerTalk] Anyone using 4O3A's Antenna Genius products?

[Richard Thorne]

Rudy,

I've been running the 8x2 switch for the last several months.  It works 
awesome with my FLex 6700 as the control signals are all handled over 
the network.

I believe the dip switches can be setup for BCD signals or an external 
selection type switch if a rig other than a Flex  is used.

I did have one problem with a control card inside the switch. 
Support/warranty was excellent and very timely.  They ended up sending 
me a new card that I was easily able to swap out on my bench.  The bad 
card only affected one side of the switch so I was still up and running 
so I could work dx between contests.

I'm looking forward to the 403A Power Genius amp.  It's going to be an 
SO2R amp to go along with the 6700.  All band and ptt signals will be 
handled over the network.  Going with the Flex solution has reduced the 
number of black boxes and cabling, significantly.

Rich - N5ZC

On 12/7/2016 10:47 AM, Rudy Bakalov via TowerTalk wrote:
> I am thinking of replacing my existing switches with Ranko's Genius product line. The main driver is its infinite expandability and ability to control remotely over the Internet.
> Would greatly appreciate the opportunity to compare notes with anyone who has installed the Genius switching gear.
> 73, Rudy N2WQ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>