[TowerTalk] My first tower section is not plumb...

Douglas Ruz (CO8DM) co8dm at frcuba.co.cu
Wed Feb 10 20:08:00 EST 2016


Thanks for all replys.

OK, first, I will build a Gin Pole...I think it is not a problem.

Second, seems that my verticality errors are "into" the tolerance range, so,
I think I can do some corrections before tighten the bolts...I put
some pressure in one of the temporary guys and make the 2nd section plumb.
In general the tower (only 2 sections now) is very stiff with "My temporary
guy ropes"...I climb to the top of the 20ft to attach the line with weight 
(plumb bob) in the center of the tower and I dont feel any movement.

My questions is:

Can I try to make the tower plumb without adding to much stress to tower
legs???

Thanks,

73....Douglas, CO8DM

"No creo que haya alguna emoción más intensa para un inventor que ver alguna
de sus creaciones funcionando. Esa emoción hace que uno se olvide de comer,
de dormir, de todo." - Nikola Tesla
----- Original Message ----- 
From: "Patrick Greenlee" <patrick_g at windstream.net>
To: <towertalk at contesting.com>
Sent: Wednesday, February 10, 2016 3:58 PM
Subject: Re: [TowerTalk] My first tower section is not plumb...


> With small  verticality errors, straightness is more important than
> vertical perfection.
>
> Keeping the tower "in-column" is more important than a little lean.
>
> Patrick        NJ5G
>
> On 2/10/2016 2:24 PM, Stan Stockton wrote:
>> Doug,
>>
>> In my opinion you should not lose an sleep over this project.  If you
>> were able to suspend yourself in mid air, you could probably put a slight
>> amount of pressure with one hand (perhaps two fingers) and make it plumb.
>> If it will make you feel better leave that plumb bob on it and when you
>> tension the guy wires make sure it's perfect.
>>
>> I have 13 towers up right now and have never in my life used a plumb bob
>> on a tower.  They look pretty straight up and down to me :-)
>>
>> 73...Stan, K5GO
>>
>>> On Feb 10, 2016, at 12:58 PM, Douglas Ruz (CO8DM) <co8dm at frcuba.co.cu>
>>> wrote:
>>>
>>> OK,
>>>
>>> I am using a plumb bob...First test attaching a plumb bob at 20 ft level
>>> (top of 2nd tower section)...I see about 5/8 inch of deviation from
>>> Sight A and 1 1/2 inch deviation from Sight B
>>>
>>> 73....Douglas, CO8DM
>>>
>>> "No creo que haya alguna emoción más intensa para un inventor que ver
>>> alguna de sus creaciones funcionando. Esa emoción hace que uno se olvide
>>> de comer, de dormir, de todo." - Nikola Tesla
>>> ----- Original Message ----- From: "Ron Young" <youngron at verizon.net>
>>> To: "Douglas Ruz (CO8DM)" <co8dm at frcuba.co.cu>
>>> Sent: Wednesday, February 10, 2016 12:01 PM
>>> Subject: Re: [TowerTalk] My first tower section is not plumb...
>>>
>>>
>>> Drop a string with weight (plumb bob) from leg at 20 ft point. How far
>>> is string from leg at concrete base? Do it with no wind.
>>> W8RJL
>>>
>>> Sent from my iPhone
>>>
>>>> On Feb 10, 2016, at 11:30 AM, Douglas Ruz (CO8DM) <co8dm at frcuba.co.cu>
>>>> wrote:
>>>>
>>>> Hi,
>>>>
>>>> I have a problem...i discovered my first tower section is not
>>>> plumb...something happen after concrete cures. Remember i have 3 ft
>>>> buried in concrete and 7 ft above concrete (1st section).
>>>>
>>>> I add the 2nd section and i am planning install the 3rd section with
>>>> the permanent guy wires.
>>>>
>>>> What to do to correct the plumbing ??
>>>>
>>>> Thoughts?
>>>>
>>>> 73....Douglas, CO8DM
>>>>
>>>> "No creo que haya alguna emoción más intensa para un inventor que ver
>>>> alguna de sus creaciones funcionando. Esa emoción hace que uno se
>>>> olvide de comer, de dormir, de todo." - Nikola Tesla
>>>> _______________________________________________
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> TowerTalk mailing list
>>>> TowerTalk at contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



More information about the TowerTalk mailing list