[TowerTalk] FW: [towertalk] Beverage

[Matt]

Well put John -  I only want to reiterate your observations - inexpensive,
easy to build out of a variety of parts, mostly forgiving, and usually quite
effective.

Matt
KM5VI



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
john at kk9a.com
Sent: Wednesday, February 10, 2016 10:23 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] [towertalk] Beverage

It really does not take much time and material to put up a Beverage antenna.
I put up temporary ones before certain contests and it only takes a few
hours to set them up. Mine are by no means an ideal installation, but they
work better than my TX antennas. The transformers are inexpensive, resistors
are really cheap and you can use old coax or surplus 75 ohm cable. Try one!

John KK9A - W4AAA


To:	"Richard (Rick) Karlquist" <richard at karlquist.com>,
towertalk at contesting.com
Subject:	Re: [TowerTalk] TowerTalk Digest, Vol 158, Issue 20
From:	Patrick Greenlee <patrick_g at windstream.net>
Date:	Wed, 10 Feb 2016 14:56:00 -0600

I think maybe I need to study Beverage antennas significantly more before
committing much time and material to any "large scale" experimentation. If a
shielded magnetic loop would do nearly as well it might be a better choice
for the next experiment after the two in process tower projects.

Patrick        NJ5G

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk