[TowerTalk] Force 12 rebuild

[Mike Reublin NF4L]

Any info on where to get some flight line? I need about 400'.

73, Mike NF4L


> On Jan 11, 2016, at 5:52 PM, Bryan Swadener via TowerTalk <towertalk at contesting.com> wrote:
> 
> No. However, they sell left-handed metric screwdrivers and pilot wrenches. They're in the same department as the sky hooks and chin nuts at http://kalecoauto.com/;-)
> vy 73,
> Bryan WA7PRC
> 
> 
>      From: W5GN <w5gn at mxg.com>
> To: 'Bryan Swadener' <bswadener at yahoo.com> 
> Sent: Monday, January 11, 2016 2:24 PM
> Subject: RE: [TowerTalk] Force 12 rebuild
> 
> And, I presume,  Left Hand Crescent Wrenches.
> 
> 73 
> 
> Barry, W5GN
> 
> -----Original Message-----
> From: Bryan WA7PRC
> Sent: Monday, January 11, 2016 2:53 PM
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] Force 12 rebuild
> 
> You can buy Elbow Grease from KaleCoAuto (http://kalecoauto.com/ $6.99). They also sell other fine products such as turn signal blinker fluid, muffler bearings, and Johnson rods. Don't delay, shop today!
> Sorry Roger, no prop wash.
> vy 73,Bryan WA7PRC
> 
>     Date: Mon, 11 Jan 2016 14:15:32 -0500
> From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk at tm.net>
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] Force 12 rebuild
> 
> Elbow grease, second shelf, 3rd aisle, right next to the buckets of prop wash.
> 
> I hope it was a bad batch, because I like them.  My Dayton winch uses some big ones
> 
> 73
> 
> Roger  (K8RI)
> 
> On 1/11/2016 Monday 12:22 PM, David Robbins wrote:
>> two things... I have never had a problem with nylocks used on the m2 antennas and have had some up for quite a few years now.
>> 
>> second, where can I buy a bucket of that elbow grease, got a few things I could use that for!   
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk