[TowerTalk] I think it might be worth investing in a guy

[Wayne Kline]

Ditto       to what John said.... 
Used my loos gauge on my 1/4 EHS   5/16 EHS    Phillystran  and Fiber Rod  guying material ,and in each case the loos gauge readings on steel or on the nonconductive guy material  were minute in there deference
 
Wayne.. 
 
 
> Date: Thu, 28 Jan 2016 11:40:24 -0500
> From: john at kk9a.com
> To: towertalk at contesting.com
> Subject: Re: [TowerTalk] I think it might be worth investing in a	guy
> 
> For the fun of it once I put my Loos gauge on Phillystran instead of the
> EHS leader and the tension reading was not much different, even though the
> EHS is considerably stiffer. I feel that it is more than accurate enough
> for guy wires.
> 
> John KK9A
> 
> 
> To:	towertalk at contesting.com, grants2 at pacbell.net
> Subject:	Re: [TowerTalk] [Bulk] Re: I think it might be worth investing in
> a	guy wire
> From:	K7LXC--- via TowerTalk <towertalk at contesting.com>
> Date:	Thu, 28 Jan 2016 10:36:39 -0500
> 
> 
> 
>     As you tension a material, it becomes more  rod-like. At the desired
> tension they all looked the same to the Loos - a very  handy and reasonably
> priced tool.
> 
> Cheers,
> Steve      K7LXC
> TOWER TECH -
> Professional tower services for amateurs
> Cell: 206-890-4188
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk