[TowerTalk] stack yagis on US Tower TX-472MDP?

[n1rr at comcast.net]

Some ops will stack yagis at the top of each crank-up section. 
The 472 has 4 sections, about ~20 foot each 
A two tribander yagi stack of about 72ft over 38ft would work well. 
Some have even gone to the extent of mounting a ringrotor to the 
tower at the top of the second section in order to turn that bottom yagi. 
Other combinations will be useful with monobanders. 
Good luck with your project. 

----- Original Message -----

From: "FritzOAQ" <fritz at k4oaq.com> 
To: "TowerTalk" <towertalk at contesting.com> 
Sent: Monday, July 25, 2016 12:11:28 PM 
Subject: [TowerTalk] stack yagis on US Tower TX-472MDP? 

Before I spend the energy moving my 25G 100 miles from one QTH to another, I 
thot I'd ask the question if stacking yagis (only one abt half way up) on a 
UST crankup is a possibility. If yes, then can it still be cranked down? If 
not cranked down all the way, then enough to tilt over? 

73, 

Fritz K4OAQ 

_______________________________________________ 



_______________________________________________ 
TowerTalk mailing list 
TowerTalk at contesting.com 
http://lists.contesting.com/mailman/listinfo/towertalk