[TowerTalk] stack yagis on US Tower TX-472MDP?

[Rich Hallman - N7TR]

I have done this with bot a Ring Rotor and the AlfaSpid Ring Rotor.  You
need to big versions of these rotors to work on the crank-ups.   Some pics
can be seen on my QRZ page and the mounting that was used on an HDX689.
These also work fine on the HDX-589.

http://www.qrz.com/db/N7TR

Thanks...
Rich

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
FritzOAQ
Sent: Monday, July 25, 2016 9:11 AM
To: towertalk at contesting.com
Subject: [TowerTalk] stack yagis on US Tower TX-472MDP?

Before I spend the energy moving my 25G 100 miles from one QTH to another, I
thot I'd ask the question if stacking yagis (only one abt half way up) on a
UST crankup is a possibility. If yes, then can it still be cranked down? If
not cranked down all the way, then enough to tilt over?

73,

Fritz K4OAQ

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk