[TowerTalk] Help needed to wire up Yaesu G-800S Rotor cable to the controller

[john at kk9a.com]

It seems like with would be easier to unplug the cable at the rotor and look
at the wiring.

John KK9A


To:	<towertalk at contesting.com>
Subject:	[TowerTalk] Help needed to wire up Yaesu G-800S Rotor cable
to the	controller
From:	"Scotty" <scotty at ashiko.com>
Date:	Sat, 30 Jul 2016 03:38:06 -0700
List-post:	<towertalk at contesting.com">mailto:towertalk at contesting.com>
My Ham friend had a stroke and cannot find his color-code to pin-number
paper 
for the 5 wires coming from the Yaesu 800S rotor on his tower.

What tests using a multimeter, etc. can I perform to the end of the rotor
cable 
in his radio room to find out what color wire goes to which of the 5 pins on

the controller box?

Thanks for any ideas you can give.
Scotty W7SW
W7SW at ARRL.NET