[TowerTalk] Correction KV4AA 20 meter beam was a Telrex

[Herbert Schoenbohm]

Now thats a CLASSIC Herb!

Love these old radio stories!!

Best regards,
Scott W3TX

On Jun 1, 2016, at 5:07 PM, Herbert Schoenbohm <herbert.schoenbohm at gmail.com> wrote:

I remember visiting the radio shack of DX legend Dick Spencely's (KV4AA) in the 70's and saw how he rotated his*Telrex*  20 meter Yagi with a bicycle elongated chain drive that came into the shack and was driven by a reversible motor.  He had a positional marker on the chain that gave him his direction indicator.  It was 100% home brew but never failed.  The beam was on  a windmill tower with the mast coming all the way to the ground with coupled water pipes and a bearing at ground level where the main chain driven sprocket was located.


> On 6/1/2016 3:59 PM, Bert Almemo wrote:
> Boxbe <https://www.boxbe.com/overview> This message is eligible for Automatic Cleanup! (balmemo at sympatico.ca) Add cleanup rule <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Fkey%3DrpEEyzOfBWcT0tTKpSEMQwCaYGVaPfXAieWcDEjceTw%253D%26token%3DUBuA6OWqDzEQ%252FAj1oAMSnBhQ9JuOvrF7560P%252Bg32kyLcqYPBaFVOF81Xrp9wzxWaALKGcJqrH%252B4V%252FVQb7%252BJrfg185FcyjwIKWcYpRh1P7X6H2B8Gym1aLfyIf00Y7oExymn4Fkq7Alc%253D&tc_serial=25611571519&tc_rand=608358986&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001> | More info <http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=25611571519&tc_rand=608358986&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
>
>
> Hi Danny,
>
> Rack and pinion is mostly for linear motion. I believe a worm gear with
> direct drive or a chain drive would be a better choice. Using a worm gear
> you have the breaking function built in. Good luck!
>
>  Bert, VE3NR
>
>
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Danny
> Pease
> Sent: Wednesday, June 01, 2016 3:23 PM
> To: TowerTalk at contesting.com
> Subject: [TowerTalk] homebrew rotator
>
> I have been intrigued with putting together my own antenna mast rotation
> system and wondered if anyone has any info on using a rack and pinion gear
> type system in conjunction with a linear actuator. If the rack and pinion
> turns out to be too expensive, my second choice would be a chain drive with