[TowerTalk] F12 C19XR Rivets
Jim Thomson
jim.thom at telus.net
Sat Mar 12 12:59:42 EST 2016
Date: Sat, 12 Mar 2016 10:53:02 -0600
From: Kevin Stover <kevin.stover at mediacombb.net>
To: towertalk at contesting.com
Subject: Re: [TowerTalk] F12 C19XR Rivets
## oops, should have read that a 2.75 inch short piece used to splice the
3 inch to the 2.5 inch.
## On my f12 40m boom, they weld every 120 degs.... where the boom drops from
3 inch od...down to 2.5 inch OD. A short length of 2.75 inch OD is slid over the end of the
2.5 inch tube.... then welded every 120 degs. So u end up with a stepped reduction,
and the boom drops from 3 inch to 2.5 inch. No taper used. Then 1/4-20 SS bolts
and SS nylocks used to bolts the 3 inch and 2.5 inch booms together. Where the bolts
pass through.... it’s a total of .375 inch thick material.
Jim VE7RF
More information about the TowerTalk
mailing list