[TowerTalk] FW: Fwd: My question

[Matt]

Hi Ed,

I have used 3 x face width as circumference and modeled using equivalent
round element, then modeled the antennas on top at actual dimensions and
height.   Don't know if that's a valid estimation, but it seems to get into
the ballpark.

Hope this helps.   Good luck on your modeling.

Matt
KM5VI

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Ed
Sawyer
Sent: Tuesday, May 17, 2016 11:19 AM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Fwd: My question

What method are people using to model a tower connected directly to ground
with a yagi on top?  Are you checking the tower physically for resonance and
using an equivalent tuned element in the model or something else?

Ed  N1UR

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk