[TowerTalk] Crank up tower lightning protection
EZ Rhino
EZRhino at fastmovers.biz
Tue Oct 11 22:10:36 EDT 2016
Steve is right, it's a non-issue. Make sure your coax shields are bonded to ground at the top and bottom of the tower, and where the cables enter the house. Bond tower to ground also at the bottom.
Chris
KF7P
On Oct 11, 2016, at 16:50 , K7LXC--- via TowerTalk wrote:
> What is the common method of making a good bond for lightning between
sections of a crank up tower?
> Seems the slip joint between sections would be a lightning protection
weakness if nothing is done...
Ideas or what has others done?
Well, the whole tower is electrically connected by the
raising/lowering cables so I would say you don't have to do anything.
So how would you propose bonding the sections when it's extended? IOW
I think it's a non-issue.
Cheers,
Steve K7LXC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list