[TowerTalk] Need US source of fence wire clamps

[Kirk Kleinschmidt]

I'd like to find these, too, but I suspect that, based on the mfr website, they're really not set up for convenient sales at reasonable prices, etc (or we'd already be able to find them :)
I need something like this to clamp sections of galvanized ground screen together. I found some round ones at Menard's and Tractor Supply, but they don't look as good and they're about $2 each.
If I can't find a source, I'm going to use a small galvanized bolt and a pair of galvanized washers to clamp my ground screen sections together.
My "wires" are almost exclusively parallel, so I don't need to attach wires coming in from 90 degrees, etc.
My ground screens are semi-temporary, so I don't care too much if I have to replace them every season or three. When I finalize the locations of a couple of towers / verticals I might replace the screens with regular radials. But maybe not. :)
Thanks,
--Kirk, NT0Z  Rochester, MN My book, "Stealth Amateur Radio," is now available from www.stealthamateur.com and on the Amazon Kindle (soon) 

    On Sunday, October 30, 2016 7:22 PM, Martin A Flynn <maflynn at theflynn.org> wrote:
 
 

 https://www.stafix.com/en-us/product/heavy-duty-claw-joint-clamp

martin

W2RWJ


On 10/30/2016 6:49 PM, Bob K6UJ wrote:
> please post the info on the reflector guys.  I would like to find 
> these too.
>
> Bob
> K6UJ
>
> On 10/29/16 10:49 AM, Raymond Benny wrote:
>> The clamps that GM3SEK mentions look good for connecting fence wire
>> together, but I have not been able to find a US source so far. Here they
>> are: http://www.rappa.co.uk/products/151-four-way-line-clamp-25-pack.
>>
>> There seem to be some other varieties of these clamps, but 
>> individually the
>> are expensive. Any USA sources or other suggestions?
>>
>> Ray,
>> N6VR

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk