[TowerTalk] Sorry typo 80/90 gear oil question for UST gearbox

[Hardy Landskov]

If this is what the manufacturer recommends then fine. I have cleaned,
reassembled many small propitch rotators using white lithium grease. The
duty cycle is almost zero and the gearbox oil is the same. For my 2 cents 90
weight oil in Northeast of the US is overkill.

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
WK1W-Ivan Shapiro
Sent: Sunday, September 11, 2016 1:10 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Sorry typo 80/90 gear oil question for UST gearbox



Today's Topics:

   1. Oil for Gearbox...80/90 GEAR OIL? (WK1W-Ivan Shapiro)
   2. Re: Swinging gate for rotating tower (StellarCAT)


----------------------------------------------------------------------

Message: 1
Date: Sun, 11 Sep 2016 07:53:06 -0400
From: "WK1W-Ivan Shapiro" <WK1W at ivanshapiro.com>
To: <towertalk at contesting.com>
Subject: [TowerTalk] Oil for Gearbox...80/90 GEAR OIL?
Message-ID: <006601d20c23$10e41f20$32ac5d60$@com>
Content-Type: text/plain;	charset="us-ascii"

Been reading about oil for gearbox.
Does anyone use 90/90 gear oil.
I used this in the gear box of my wind turbine.
One would think it would e fine for this job,
Thanks. 73

Ivan Shapiro
WK1W


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk