[TowerTalk] Replacement Bolts for Rohn GB45D

[Mike Ryan]

Have you checked this website for hardware?  - Mike

http://www.3starinc.com/25g_tower_accessories.html


-----Original Message----- 
From: john at kk9a.com 
Sent: Thursday, September 22, 2016 2:08 PM 
To: towertalk at contesting.com 
Subject: Re: [TowerTalk] Replacement Bolts for Rohn GB45D 

The guy bracket uses different bolts than the tower joint kit.

John KK9A

To: "'Victor A. Kean, Jr.'" <vkean at k1lt.com>, <towertalk at contesting.com>
Subject: Re: [TowerTalk] Replacement Bolts for Rohn GB45D
From: "Tim Duffy" <k3lr at k3lr.com>
Reply-to: k3lr at k3lr.com
Date: Thu, 22 Sep 2016 12:57:42 -0400


Hello Victor:

Here are the same ones your tower had from Rohn:

https://www.dxengineering.com/parts/roh-45jbk

73
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
Victor A. Kean, Jr.
Sent: Wednesday, September 21, 2016 10:06 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Replacement Bolts for Rohn GB45D

I have a Rohn GB45D guy bracket that is missing many bolts.  The bolts
that attach the inner brackets to the outer parts appear to be 3/8 x 16
grade 5 hot dip galzanized and the corresponding nuts appear to be
"heavy" hot dip galzanized and presumably grade 5 since the bolt would
be under tension.

Are my suppositions correct?

Anyone know where to find such hardware?  I have already checked Bolt
Depot; Albany County Fasteners; Grainger; and Fastenall.  Zinc plated
bolts are readily found, but not hot dip galvanized.

Thanks!

Victor, K1LT

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk