[TowerTalk] Fwd: Advice on tower restrictions possible new

[jimlux]

On 2/8/17 7:07 AM, W4AAW at aol.com via TowerTalk wrote:
> Two of my towers are Rohn 25G.
>
> One has the Rohn anti-climbing section at the bottom.
>
> The other tower emulates this with  three pieces of 3/4" Marine plywood, 11" X 8'.
>
> One goes on each side of the bottom section of tower and is fastened with U bolts .
>
> This is the same effect the anti-climb Rohn section provides.
>

This "panel over the ladder" kind of thing seems to be the most common 
industrial/commercial solution as well.  McMaster-Carr has them, you can 
probably drive around any neighborhood and see them, etc.
Usually, they have hinges on one vertical edge, and it opens like a 
door, and is secured with a padlock/hasp arrangement on the other.

Realistically, someone who is a skilled climber can climb around anything.