[TowerTalk] Experience with crank up towers

Chris EZRhino at fastmovers.biz
Wed Jun 7 09:57:27 EDT 2017


Davis BuryFlex is pretty darn close to it.   It has a very good PE jacket, both for wear resistance, water resistance and sun resistance.

Chris
KF7P








On Jun 7, 2017, at 7:47 AM, Clay Autery wrote:

> KF7P, yes... Chris's stuff looks fantastic.  Thanks for the tip.
> Yes, the Times part numbers ending in -DB for direct burial are UV
> resistant...  NO cable stock that I am aware of is UV proof...  :)
> 
> 73,
> 
> ______________________
> Clay Autery, KY5G
> 
> On 6/7/2017 6:40 AM, WK1W-Ivan Shapiro wrote:
>> K47P makes agreat standoffs.  I bought a set for my UST.
>> Regarding keeping coax off the ground:  I use "split=loom"....spelling, like
>> used in automobile engines to protect wires.  Kf7P's standoffs have more
>> area within so more coax and other wires can be put in.  The black
>> split-loom hold 4 LMR400s=ultraflex, control wire for rotor, cat5-e for
>> camera control, "siamese" cable (18-2 forn 24VAC for camera power and 75 ohm
>> for analog camera feed.  One more thing: protects the coax from UV, though I
>> understand that BURYFLEX is not UV sensitive (have not used it yet, only
>> LMR400 UF.
>> 73
>> Ivan
>> WK1W
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 



More information about the TowerTalk mailing list