[TowerTalk] TowerTalk Digest, Vol 174, Issue 5

Wed Jun 7 17:56:21 EDT 2017

Paul, saving this for later....  I'd like to chat via phone, et al. at
some point to hear more about your experiences with this tower...
Looks tailor made for me...

73,

______________________
Clay Autery, KY5G

(318) 518-1389

On 6/7/2017 10:58 AM, Paul Braiman wrote:
> I own a Tashjian LM354-HDSP (motorized “crank up”). It has been up for 2 years now with no problems. 
>
> Running a bundle of Times LMR-400UF, a SteppIR control cable, and a heavy-duty rotor cable to my Orion 2800. Used Gorilla Tape at 3 foot intervals to secure the cables together. 
>
> Also use KF7P’s standoff arms. When the tower extends, the bundle feeds very smoothly through the arms, when it retracts, same thing. Cables have never been caught on the arms. The bundle coils itself near the tower base on a pile of medium-fine gravel, so it stays pretty dry. By pure luck of the tower orientation and its location in my yard, the cable/coil receives a lot of shade during the day, even in the blazing California sun and I’m happy with how well it all works.
>
> -Paul, W2PIR
>
>> On Jun 7, 2017, at 00:01, towertalk-request at contesting.com wrote:
>>
>> Send TowerTalk mailing list submissions to
>> 	towertalk at contesting.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> 	http://lists.contesting.com/mailman/listinfo/towertalk
>> or, via email, send a message with subject or body 'help' to
>> 	towertalk-request at contesting.com
>>
>> You can reach the person managing the list at
>> 	towertalk-owner at contesting.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TowerTalk digest..."
>> Today's Topics:
>>
>>   1. Experience with crank up towers.... (Clay Autery)
>>   2. Re: Experience with crank up towers.... (Mike Fahmie)
>>   3. Re: Experience with crank up towers.... (Clay Autery)
>>   4. Re: Experience with crank up towers.... (EZ Rhino)
>>   5. Re: Experience with crank up towers.... (Clay Autery)
>>   6. Re: Experience with crank up towers.... (Jim Rhodes)
>>
>> From: Clay Autery <cautery at montac.com>
>> Subject: [TowerTalk] Experience with crank up towers....
>> Date: June 6, 2017 at 18:47:31 PDT
>> To: towertalk at contesting.com
>>
>>
>> Only 53 now, but looking forward, I know the day will come when I can't
>> climb towers, et al.  (Spouse wishes that was now)  So, I am looking at the
>> Tashjian Towers:
>>
>> LM-354HD 54 ft. manual crank up with gear box
>> LM-354HDSP 54 ft. motorized crank up with tower
>>
>> And then use the TA-70L tilt-over base.
>>
>> One of my main questions for those of you who have crank up topwer
>> experience....
>>
>> How do you handle the feed line(s) when you bring it down?  I'm assuming
>> feedline stand offs external to the tower... but how exactly do you
>> dress the lines coming down without damaging them?
>>
>> -- 
>> ______________________
>> Clay Autery, KY5G
>>
>>
>>
>>
>>
>> From: Mike Fahmie <wa6zty at yahoo.com>
>> Subject: Re: [TowerTalk] Experience with crank up towers....
>> Date: June 6, 2017 at 18:55:33 PDT
>> To: Clay Autery <cautery at montac.com>, "towertalk at contesting.com" <towertalk at contesting.com>
>> Reply-To: Mike Fahmie <wa6zty at yahoo.com>
>>
>>
>> I use Coax Arms by KF7P.  They have an arc'd shoulder that prevents sharp bends.See his website at:   http://www.kf7p.com/KF7P/CoaxArms.html
>>
>> -Mike-WA6ZTY
>>
>>      From: Clay Autery <cautery at montac.com>
>> To: towertalk at contesting.com 
>> Sent: Tuesday, June 6, 2017 6:49 PM
>> Subject: [TowerTalk] Experience with crank up towers....
>>
>> Only 53 now, but looking forward, I know the day will come when I can't
>> climb towers, et al.  (Spouse wishes that was now)  So, I am looking at the
>> Tashjian Towers:
>>
>> LM-354HD 54 ft. manual crank up with gear box
>> LM-354HDSP 54 ft. motorized crank up with tower
>>
>> And then use the TA-70L tilt-over base.
>>
>> One of my main questions for those of you who have crank up topwer
>> experience....
>>
>> How do you handle the feed line(s) when you bring it down?  I'm assuming
>> feedline stand offs external to the tower... but how exactly do you
>> dress the lines coming down without damaging them?
>>
>> -- 
>> ______________________
>> Clay Autery, KY5G
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
>>
>>
>>
>> From: Clay Autery <cautery at montac.com>
>> Subject: Re: [TowerTalk] Experience with crank up towers....
>> Date: June 6, 2017 at 19:49:17 PDT
>> To: "towertalk at contesting.com" <towertalk at contesting.com>
>>
>>
>> Like that idea, but looks like they don't have the curved arms for the
>> Tahjian towers...  just hoops.
>> I like the idea of keeping the feed line off the ground...
>>
>> ______________________
>> Clay Autery, KY5G
>>
>> On 6/6/2017 8:55 PM, Mike Fahmie wrote:
>>> I use Coax Arms by KF7P.  They have an arc'd shoulder that prevents
>>> sharp bends.
>>> See his website at:   http://www.kf7p.com/KF7P/CoaxArms.html
>>>
>>> -Mike-
>>> WA6ZTY
>>>
>>
>>
>>
>>
>> From: EZ Rhino <EZRhino at fastmovers.biz>
>> Subject: Re: [TowerTalk] Experience with crank up towers....
>> Date: June 6, 2017 at 20:28:12 PDT
>> To: Towertalk Reflector <towertalk at contesting.com>
>>
>>
>> hi Clay,
>>
>> Can do an entire set of curved arms similar to the ones you see there for USTowers.  Just don't get asked for them as frequently.  They come powdercoated or if you are patient I can get them galvanized with my next batch.  Email me direct for more info.
>>
>> Chris
>> KF7P
>>
>>
>>
>> On Jun 6, 2017, at 20:49 , Clay Autery wrote:
>>
>> Like that idea, but looks like they don't have the curved arms for the
>> Tahjian towers...  just hoops.
>> I like the idea of keeping the feed line off the ground...
>>
>> ______________________
>> Clay Autery, KY5G
>>
>> On 6/6/2017 8:55 PM, Mike Fahmie wrote:
>>> I use Coax Arms by KF7P.  They have an arc'd shoulder that prevents
>>> sharp bends.
>>> See his website at:   http://www.kf7p.com/KF7P/CoaxArms.html
>>>
>>> -Mike-
>>> WA6ZTY
>>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>>
>>
>>
>>
>> From: Clay Autery <cautery at montac.com>
>> Subject: Re: [TowerTalk] Experience with crank up towers....
>> Date: June 6, 2017 at 20:37:05 PDT
>> To: towertalk at contesting.com
>>
>>
>> Thanks Chris!  You just earned a book mark and an email inquiry!  :-)
>>
>> ______________________
>> Clay Autery, KY5G
>>
>> On 6/6/2017 10:28 PM, EZ Rhino wrote:
>>> hi Clay,
>>>
>>> Can do an entire set of curved arms similar to the ones you see there for USTowers.  Just don't get asked for them as frequently.  They come powdercoated or if you are patient I can get them galvanized with my next batch.  Email me direct for more info.
>>>
>>> Chris
>>> KF7P
>>
>>
>>
>> From: Jim Rhodes <jimk0xu at gmail.com>
>> Subject: Re: [TowerTalk] Experience with crank up towers....
>> Date: June 7, 2017 at 00:01:09 PDT
>> To: Clay Autery <cautery at montac.com>
>> Cc: towertalk at contesting.com
>> Reply-To: jim at rhodesend.net
>>
>>
>> I use the regular loop type arms that came with my Hy-Gain tower, but I use
>> a couple of feet of half inch heater hose at each arm. Have to put it on
>> before connectors of course. Cinch up some nylon ties to keep it in place.
>> Some folks just let it pile up on the ground or in a barrel,  but we have
>> winter here and the tower is north of the house and the base is shadowed in
>> the winter.
>>
>> Jim Rhodes
>> K0XU
>>
>> On Jun 6, 2017 22:37, "Clay Autery" <cautery at montac.com> wrote:
>>
>>> Thanks Chris!  You just earned a book mark and an email inquiry!  :-)
>>>
>>> ______________________
>>> Clay Autery, KY5G
>>>
>>> On 6/6/2017 10:28 PM, EZ Rhino wrote:
>>>> hi Clay,
>>>>
>>>> Can do an entire set of curved arms similar to the ones you see there
>>> for USTowers.  Just don't get asked for them as frequently.  They come
>>> powdercoated or if you are patient I can get them galvanized with my next
>>> batch.  Email me direct for more info.
>>>> Chris
>>>> KF7P
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk