[TowerTalk] radials 160

Robie Elms ruler55 at gmail.com
Tue Mar 7 08:56:20 EST 2017


One brand of this equipment is EzTrench

Here is a link to their website

http://www.eztrench.com/wirecable-installers/

Robie - AJ4F

On Tue, Mar 7, 2017 at 7:35 AM, <w5prchuck at gmail.com> wrote:

> There is a machine similar to an edger that electricians use to cut the
> trench and insert the wire all in one pass.  I think you can rent them.
> Maybe even at Home Depot.  Might be worth buying one…
>
> Chuck W5PR
>
> Sent from Mail for Windows 10
>
> From: Herb Krumich via TowerTalk
> Sent: Monday, March 6, 2017 5:33 PM
> To: towertalk at contesting.com
> Subject: [TowerTalk] radials 160
>
> All winter I have been clearing out a large area to put radials down for a
> 160 meter antennaI built an antenna which looks like a T between two 90
> foot towersThe vertical leg is 65 feet and the horizontal is the same.
> I used it with only a few radials and was pleased with contacts to the
> west coast from Pa.So here is my questionWhat type of tool can I use to
> bury the radials an inch or so.My problem is there are quite a few surface
> rocks that I will have to deal with.Does Home Depot or Lowe's have
> something ?I was even just thinking about using a pic and draging it
> backwards
> Preferable no motors due to the rocksThanksHerb K2LNS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


More information about the TowerTalk mailing list