[TowerTalk] radials 160

[StellarCAT]

if you do find something please let us all know - I'm not aware of anything 
that is available to rent for this purpose.

Gary
K9RX


-----Original Message----- 
From: w5prchuck at gmail.com
Sent: Tuesday, March 7, 2017 8:35 AM
To: Herb Krumich via TowerTalk
Subject: Re: [TowerTalk] radials 160

There is a machine similar to an edger that electricians use to cut the 
trench and insert the wire all in one pass.  I think you can rent them. 
Maybe even at Home Depot.  Might be worth buying one…

Chuck W5PR

Sent from Mail for Windows 10

From: Herb Krumich via TowerTalk
Sent: Monday, March 6, 2017 5:33 PM
To: towertalk at contesting.com
Subject: [TowerTalk] radials 160

All winter I have been clearing out a large area to put radials down for a 
160 meter antennaI built an antenna which looks like a T between two 90 foot 
towersThe vertical leg is 65 feet and the horizontal is the same.
I used it with only a few radials and was pleased with contacts to the west 
coast from Pa.So here is my questionWhat type of tool can I use to bury the 
radials an inch or so.My problem is there are quite a few surface rocks that 
I will have to deal with.Does Home Depot or Lowe's have something ?I was 
even just thinking about using a pic and draging it backwards
Preferable no motors due to the rocksThanksHerb K2LNS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk