[TowerTalk] digging radials

[w5prchuck at gmail.com]

I have not used an edger, but I think it will be slow going especially if you try to go deep.  The manual says:

“NOTE: There are 5 cutting depth settings from approximately ground level to 2.5” (63 mm) deep. Do not overload the edger capacity by attempting to edge too deep at too fast a rate. To edge at deeper settings, make multiple passes, first cutting at shallow depths.”

This would be a good way, but expensive to buy.  I think renting one might work: http://www.ebay.com/itm/like/142313439152?lpid=82&chn=ps&ul_noapp=true

Chuck W5PR

Sent from Mail for Windows 10

From: Dick Green WC1M
Sent: Sunday, March 19, 2017 3:58 PM
To: 'Herb Krumich'; towertalk at contesting.com
Subject: Re: [TowerTalk] digging radials

Anybody tried one of these?

http://www.homedepot.com/p/Powermate-9-in-79cc-Gas-Walk-Behind-Edger-with-Curb-Hopping-Feature-PWLE0799/202817519

73, Dick WC1M

-----Original Message-----
From: Herb Krumich [mailto:wa2fgk at yahoo.com] 
Sent: Sunday, March 19, 2017 11:14 AM
To: towertalk at contesting.com
Subject: [TowerTalk] digging radials

I got back to Home Depot and the edger is on sale for 54.00 Ryobi EdgerExpand-It Attachment9" Dual Serrated Blade101-823Adjusts from 1/2 inch to 2 1/2 inches

Fits Toro Weed Wacker
73'sHerb K2LNS


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk