[TowerTalk] T-Base Drawing

[Mike & Becca Krzystyniak]

Greetings, 

   I took delivery of a HDX589 last year.

   Included with the tower was the Owners manual.
   That manual covers the installation process and is red stamped a
"controlled document" on every page.
   They also provided a structural analysis report that discusses the
mechanical design and analysis.

   Between the two I think there is most everything one might need.

73  Mike K9MK/5




-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of
Richard (Rick) Karlquist
Sent: Monday, May 08, 2017 4:28 PM
To: Grant Saviers; Joe Partlow; towertalk at contesting.com
Subject: Re: [TowerTalk] T-Base Drawing

On 5/8/2017 11:21 AM, Grant Saviers wrote:

> I just went around with Rohn re the mechanical properties for 
> sections, and now they won't part with this either.  How does a 
> structural engineer get the data to do calcs??  I need 45, 55 and 65
numbers.
> "We've been copied" was the excuse, but that seems pretty ridiculous 
> since there are no design details in that data.  Any copies lurking 
> out there?  I have the 25 section data if a copy is needed.
>
> Grant KZ1W
>

The answer might be:

1) If you want to place a purchase order concurrent with asking for calcs,
they might honor that.

2) If you want to hire a structural engineer on Rohn's payroll, he will have
access to the calcs.

Just speculating...

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk