[TowerTalk] 4 square advice
john at kk9a.com
john at kk9a.com
Sat Nov 11 12:38:44 EST 2017
I find it hard to believe that using wire vertical instead of a freestanding
aluminum vertical with maybe a 1/2 diameter top section or even a solid 3"
irrigation pipe will make enough bandwidth difference to be concerned about.
John KK9A
To: towertalk at contesting.com
Subject: [TowerTalk] 4 square advice
From: Bill via TowerTalk <towertalk at contesting.com>
Reply-to: cqtestk4xs at aol.com
Date: Fri, 10 Nov 2017 20:51:15 -0500
I'm starting construction of my wire 4 square for 80 meters.
I know the bigger the diameter is (like having Rohn 25 tower for the
radiator)
the better the bandwidth.
I'm using #12 insulated wire, but in an effort to enhance bandwidth I'm
planning using two wires joined at the top and at the feedpoint for each
element. To space them I'm using some old KLM diamond shaped spacers every
five feet or so to keep the two wires approximately 5 or 6 inches from each
other...running the wires parallel to each other.
Any thoughts as to how helpful this will be in increasing bandwidth? I have
about 45 of these spacers and they're just gathering dust, and they are
lightweight, UV resistant and free. Also, any thoughts as to how this might
affect the impedance etc.?
Bill K4XS/KH7XS
More information about the TowerTalk
mailing list