[TowerTalk] FW: Tower Grounds

[Steve Maki]

Suitably sized, tinned split bolt connectors on low diagonals or 
horizontals might be a good option in these cases.

-Steve K8LX

On 10/17/2017 4:20 PM, Keith Dutson wrote:
> Same here.  The lowest bolts are too far up the tower.  I want my ground to
> connect to the bottom.
**
> Not every tower is bolted to a base plate set in concrete. Many of us, me
> included, bury 4 ft or so of the lower tower segment in the concrete base,
> thus the need for clamps.
> 
> 73, Jim K9YC