[TowerTalk] (no subject)

[grants2 at pacbell.net]

I like this one - melt the rope

http://www.homemadetools.net/forum/flamethrowing-drone-clearing-electric-wires-gif-63604 


Also handy for all other sorts of neighborhood problems hams encounter.

Grant KZ1W

On 10/18/2017 14:27 PM, David Robbins wrote:
> Hmmmm, didn't seem to go the first try...
>
> Lets see-saw...
> 1. chain saw
>
> 2. pole saw
>
> 3. saw attached to a drone... (have you seen the video of them trimming trees on a power line right of way from a helicopter?  Nasty!)
>
> 4. saw(or wire cutter) on a wire crawler that climbs the wire and cuts it at the top thus falling to an early death.  Something like this: https://spectrum.ieee.org/automaton/robotics/industrial-robots/georgia-tech-tarzan-robot-swings-around-on-wires
>
> 5. a wire saw (thin survival saw that coils up) tie long ropes on each side of it and put it over the problem wire.  pull the problem wire out as far as you can, even if you have to add rope to it to get the wire saw as high as possible.  Use the ropes on the wire saw to slide it up as far into the tree as you can, then use a sawing motion with the two ropes to cut the wire.  depending on how high it is you could thread the problem wire through pvc conduit and keep adding sections to push the wire saw as far up as you can before cutting.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt at arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>