[TowerTalk] 7-16 DIN Males for RG-213/214
W1JCW John
W1JCW at hotmail.com
Wed Oct 25 11:56:13 EDT 2017
I have several of these connectors for $20 each plus shipping left over from a project.
These are not crimp but compression, water tight and very high quality. I've never had an issue with them.
If anyone is need of these connectors contact me off the reflector. W1JCW at hotmail.com
73-
W1JCW
John
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of john at kk9a.com
Sent: Wednesday, October 25, 2017 10:49 AM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] 7-16 DIN Males for RG-213/214
The only ones that I have seen were $75+. Perhaps crimped ones are less.
If I need a DIN jumper I use FSJ4 cable, otherwise I use N or UHF connectors on RG8 sized cables.
GL
John KK9A
To: "towertalk at contesting.com" <towertalk at contesting.com>
Subject: [TowerTalk] 7-16 DIN Males for RG-213/214
From: Byron Tatum <bjtatum1 at att.net>
Reply-to: Byron Tatum <bjtatum1 at att.net>
Date: Wed, 25 Oct 2017 12:12:28 +0000 (UTC)
Hello- Does anyone know of a source of good quality reasonably priced
7-16
DIM male connectors, of solder/clamp type, that fit the RG-213/214 type
cables? I am planning some future feedline upgrades for my VHF/UHF antenna
systems and have a lot of 7-16 DIN female connectors for my newer versions 7/8"
and 1-5/8" Cablewave heliax. Thanks, Byron W5FH
_______________________________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Ftowertalk&data=02%7C01%7CW1JCW%40hotmail.com%7Cfb73a245ba7945b7001408d51bc00f48%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636445434075895001&sdata=0kAxM%2F2H7dAWCk0E1596JF%2BYwlGWM97iz4PSt%2FRhgsM%3D&reserved=0
More information about the TowerTalk
mailing list