[TowerTalk] Turnbuckles with Rod Sides

[Peter Voelpel]

Same here and also on boom guy wires.

73
Peter, DJ7WW

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Keith
Dutson
Sent: Montag, 11. September 2017 23:43
To: k1ttt at arrl.net; towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides

Same here.  That 1/4 EHS works great.

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of David
Robbins
Sent: Monday, September 11, 2017 4:01 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides

> When using turnbuckles, *don't forget to safety wire them*.  I have never
seen a ham safety wire a turnbuckle.

My turnbuckles are all wired.  I just take a cut off piece of guy wire and
loop it through the bodies of all the turnbuckles and then through the live
side eyes, that way neither side can turn.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Roger
(K8RI) on TT
Sent: Monday, September 11, 2017 20:39
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Turnbuckles with Rod Sides


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk