[TowerTalk] turnbuckle safety wires
john at kk9a.com
john at kk9a.com
Wed Sep 13 15:44:46 EDT 2017
Is this a galvanized turnbuckle or some other material or coating? My
tower turnbuckles do not easily turn under tension.
John KK9A
To: Steve Maki <lists at oakcom.org>
Subject: Re: [TowerTalk] turnbuckle safety wires
From: "Joe Giacobello, K2XX via TowerTalk" <towertalk at contesting.com>
Reply-to: k2xx at swva.net
Date: Wed, 13 Sep 2017 14:21:43 -0400
I had problems with turnbuckles unscrewing themselves. While not as sure
as the wire approach many have described here, ever since I started using
thread locking adhesive (Loctite, Permabond, etc.) I've not had any
problems. Similarly for rotor mounts. There are various strength grades. A
medium strength grade should be adequate.
73, Joe
K2XX
More information about the TowerTalk
mailing list