[TowerTalk] 40M rotary dipole
Richard Thorne
rthorne at rthorne.net
Wed Sep 20 11:22:16 EDT 2017
Check out Balundesigns.com
Nice chokes ready to go in many different configurations. I've been
using them for years. Very well built and quick to ship.
Rich - N5ZC
On 9/20/2017 9:31 AM, Dave Sublette wrote:
> Thanks for all the suggestions on the RF choke. I read the article by K9YC and concluded that the best approach wold be to wind RG8X around 6 Fair-Rite toroids made from type 31 material and 2.4 inches in diameter. The big problem is they are listed at over $17 each from the distributors. I will need 18 of them eventually. 6 each for this dipole and two more yagis. That’s a large price tag, but still cheaper (and better performing) than the commercial units available, according to K9YC.
>
> I have (again at the suggestion in the paper by K9YC) sent a request for quit to Fair-Rite, asking what quantity I would have to buy in order to get “a decent price”. It might work out that I could make a large purchase and offer kits of toroids to the group. I’m not looking to make money. I only want to have a good choke at the lowest price I can find.
>
> I may put the antenna up with a temporary choke on it and replace it when/if I can get the toroids.
>
> I will keep you informed as to what I find.
>
> I appreciate your inputs on this project. It’s been fun.
>
> Dave, K4TO
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list