[TowerTalk] Yagi Optimizer file "Match" line

[Chuck Dietz]

Where does this line appear?  is it just above the element table?  Is it a
6 meter yagi file?
The line just above the element table is the diameter of the tubing for
each element section. The table below lists the lengths

6 El 6M beam on 24' Boom
Stacked 240.000
50.000 50.150 50.300 MHz
6 elements, inches
                 1.5000    0.8750    0.6250    0.4375
  0.0000    3.5000   21.0000   23.5000   14.5340
 36.6370    3.5000   21.0000   23.5000   10.0887
 70.8626    3.5000   21.5000   23.5000    7.4651
145.4953    3.5000   21.5000   23.5000    6.0914
211.4772    3.5000   21.5000   23.5000    5.3854
288.0000    3.5000   21.5000   23.6027    0.0000

    Made from Hy-Gain 104CA
Data for 2 beams stacked with 20' spacing.  Gamma match

The stuff below the table are the notes manually typed in.
The low-center-high frequencies for optimization are listed just below the
"240.000"
maybe the file is scrambled.

Chuck W5PR

On Sat, Sep 23, 2017 at 12:58 AM, Dan Maguire via TowerTalk <
towertalk at contesting.com> wrote:

> I have a K6STI YO (.yag) file that has this line:
>
> Match: 2 0.3750 4.5000 54.0000 6.0000 0.0 50.0 0.0800
>
> Can anyone interpret those parameters for me?  And a second question, does
> anyone have any documentation for YO files that explains this line?
> Perhaps the user manual for the most recent (?) version of YO?
>
> Dean Straw's "Yagi for Windows" manual does a good job of describing "YO
> like" file formats but doesn't mention a "Match" line.
>
> Thanks.
>
> Dan, AC6LA
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>