[TowerTalk] For Sale: AN Wireless HD60ft tower, mast, rotor and accessories

[Ed Kucharski]

AN Wireless HD 60 Self supporting tower (see: http://www.anwireless.com/for more info, specs and present prices)

2 Rotor Mounting Plates (1 drilled for Prosistel PST 71/61)

1 Thrust Bearing Plate (drilled for a Peer 2 in., 2 hole, flange bearing)

1 60 ft. Safety Lifeline System with  DBI-SALA Safety Sleeve and Carabiner

1 Full set of Step Bolts

1 Chrome-Molly 4130, - 2 inch OD, 1/4 inch wall - ~22 ft. mast

1 Prosistel PST 71 Rotor with original controller and an extra controller and extra rotor to mast bracket, hardware and approximately 130 ft. of rotor cable. 

$3650 for all.


The pending purchase of my tower fell through earlier this week. The tower was removed yesterday and is on the ground in 6 x 10 foot sections.  I'd prefer to sell as a complete package. The tower will require a 5 foot concrete base section and appropriate base (there is a potential to increase the height of the tower by adding sections to the bottom). Photos available upon request and I can also put you in touch with the climber/rigger who assisted me with the removal and disassembly to provide further info on the condition of the tower. Pick-up (only) required at my Westminster, MD QTH and will most likely require a trailer or multiple trips with a pick-up truck. Please contact me off reflector with questions.

73,

Ed K3DNE