[TowerTalk] For Sale AN Wireless HD-60 Tower and Mast

[Ed Kucharski]

Thanks Dave. My AN Wireless tower which is the one for sale, is different from yours, in that my tower is a welded assembly in 10 foot sections. Each section bolts together with 3 diagonal bolt-on braces between each section. Unfortunately it does make it somewhat more difficult to transport than the newer all bolt together design. According to AN Wireless, 4 sections will "nest" together (with climbing steps removed) for more compact transport. 
73,
Ed K3DNE

> On April 15, 2018 at 12:50 PM David Gilbert <xdavid at cis-broadband.com> wrote:
> 
> 
> 
> This is a pretty good price for an outstanding tower.  Since hauling ten 
> foot sections with a large cross section can be problematic for most 
> hams, I thought I would point out that this tower is assembled totally 
> with bolts and could most likely be rather easily disassembled, moved, 
> and reassembled.  It would probably take a few trips to haul all the 
> pieces with a pickup or trailer, but I think it could be done.
> 
> The assembly instructions are here http://www.anwireless.com/assembly.pdf
> 
> And starting here you can see several pictures of how I assembled and 
> installed my own AN Wireless HD-70 tower 
> http://www.ab7e.com/AB7E_Tower_Page_1.html
> 
> By the way, I have that same 22' Chrome Moly mast and it's a brute. Mine 
> has seen winds in excess of 100 mph with an OB16-3 and OB2-40 on it with 
> no problems.
> 
> 73,
> Dave   AB7E
> 
> 
> 
> On 4/15/2018 6:53 AM, Ed Kucharski wrote:
> > AN Wireless HD-60, 60 foot heavy duty self supporting tower (see:http://www.anwireless.com/formore info, specs and present prices).
> > 2 Rotor Mounting Plates and 1 Thrust Bearing Plate (drilled for a Peer 2 in., 2 hole, flange bearing) in the top section.
> > 1 60 ft. Safety Lifeline System with DBI-SALA Safety Sleeve and Carabiner
> > 1 Full set of Step Bolts.
> > The tower is on the ground in 6 x 10ft. sections and ready for sale/pickup. Photos available upon request for serious inquiries only.
> > $2100. Pick-up (only) at my Westminster, MD QTH.
> > Requires a 5 foot concrete base section (available from manufacturer) and appropriate base.
> >
> > I do have a 4130 Chrome Moly ~22 foot, 2 inch OD, 1/4 inch wall Mast available (sold separately ($200) or could bundle with the HD-60 Tower for a total of $2250).
> > This tower can be converted into an 80 foot HHD-80 (Heavy-Heavy Duty Tower) by adding 2 HHD sections to the bottom and HHD concrete base section (all available from manufacturer).
> >
> >
> > 73,
> >
> > Ed K3DNE
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk at contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk