[TowerTalk] FW: Ham III rotor brake failure

[Matt]

Could be broken springs(I believe there are a total of 4) , stuck brake
wedge, broken brake wedge, or a broken brake pin.   I feel that they are
pretty easy to service and have found that parts are readily available from
several sources.

Hope this info is helpful.   Good luck.
73
Matt
KM5VI




-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of N4IJ
Sent: Wednesday, April 25, 2018 9:00 PM
To: towertalk <towertalk at contesting.com>
Subject: [TowerTalk] Ham III rotor brake failure

Getting ready to take down my beam and rotor. The brake does not work. I
hear it click when it is energized on the tower.  Would that mean a spring
might be broken ?  Rotates fine - wind blows it whatever way it wants to.

Doug N4IJ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

---
This email has been checked for viruses by AVG.
http://www.avg.com