[TowerTalk] Rotor loop coax

[Jim]

That will work great. That's what I use. Try to find some decent UHF female
connectors for either the LMR-400 or RG213. Or use N type connectors. Seal
them up well!

Remember to make your last wrap of tape from bottom to top. Like you would
install shingles on a roof.

73
Jim W7RY


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces at contesting.com] On Behalf Of Terry
Brown
Sent: Sunday, August 19, 2018 12:08 PM
To: towertalk at contesting.com
Subject: [TowerTalk] Rotor loop coax

I finally got approval to put up my tower and 10-15-20 meter beam.  Is RG
213 the best and most flexible coax to use from the radiator for the loop
for tower rotation?   It will connect to LMR-400 down tower leg. 

Thanks!

Terry
N7TB 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk