[TowerTalk] N connector, Re: UHF (PL259) soldered center
KY5G at montac.com
Fri Jul 13 12:00:56 EDT 2018
One of the top reasons that I make ALL my own cables if at all possible...
No substitute for quality materials, combined with the proper tooling,
and a healthy dose of OCD.
Clay Autery, KY5G
On 13-Jul-18 10:58, Jeff DePolo wrote:
>> Surprisingly, some of the worst problems have been with
>> certain runs of
>> factory made jumpers, the manufacturer to remain nameless.
>> -Steve K8LX
> <cough> Commscope <cough>
> Even before Commscope bought them, we had a lot of issues with Andrew LDF4
> factory jumpers. The common problem was that the dielectric wasn't cleaned
> off the center conductor before the center pins were installed.
> We don't buy factory jumpers any more...
> --- Jeff WN3A
More information about the TowerTalk