[TowerTalk] Replacing station ground J-cord connectors

[Wayne Kline]

I use  Cable Glands for all my outside boxes and on HB boxes In the shack

A GREAT source is    Amazon….. there  size is in MM so a little  conversion is needed..



To a search on  “ Cable Glands “



Wayne W3EA





Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10



________________________________
From: TowerTalk <towertalk-bounces at contesting.com> on behalf of jimlux <jimlux at earthlink.net>
Sent: Tuesday, June 5, 2018 7:38:18 PM
To: towertalk at contesting.com
Subject: Re: [TowerTalk] Replacing station ground J-cord connectors

Cable Gland..


https://www.grainger.com/product/2DPF7



On 6/5/18 2:13 PM, Bob Matthews wrote:
> J-Cord connectors are AKA Strain Relief Connectors. They are used for bringing rubber insulated multi-wire cables into fixtures, panels and boxes out doors. They have a swaged rubber grommet that pulls tight to the cable when compressed by the compression nut.
> Bob KT3RR
>
> Sent from my iPhone
>
>> On Jun 5, 2018, at 17:05, Michael Mathis <n4mik at comcast.net> wrote:
>>
>> Bob Matthews mentioned using J-cord connectors when passing coax or hardline through box enclosures or panels: What is a J-cord connector?
>>
>> Mike Mathis. N4MIK
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk at contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk