[TowerTalk] Arc fault Acom 2K

[Marsh KA5M]

I suggest you contact Val LZ1VB at val at acom-bg.com

In my experience, the customer support from ACOM is outstanding! 

Marsh, KA5M 


-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of W1JCW John
Sent: Friday, November 9, 2018 6:46 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Arc fault Acom 2K

Have a strange problem in the shack.

Run the same antennas and had no issues, put in line my Yaesu 5000 and
palstar AT.
All antennas tune flat 1:1 but when I run QRO the Acom 2K comes up with arc
fault even with low drive of 20watts.

I can place a load at the end of the coax outside and have no issues but
when I got to any antenna 260' center fed dipole or a vertical I get a fault
and the amp shuts down.

Sounds like an RF issue but why now when nothing has changed outside?

Have not seen anything like this in 40yrs I've been operating.


73-
W1JCW
John

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk