[TowerTalk] Stripping rg142
jimlux
jimlux at earthlink.net
Sun Nov 25 11:35:23 EST 2018
On 11/24/18 7:55 PM, Jeff DePolo wrote:
>> What's the best way to strip this in preparation of crimp connectors
>
> If you're going to be doing a lot of connectors, the best I have found are
> the Greenlee (Paladin) CST-Vario strippers.
I heartily endorse this. I bought one 30 years ago, and I'd never give
it up.
They are a bit of a PITA to set
> up the first time since they are fully adjustable both in terms of distance
> between each strip level as well as depth of each level. But once you have
> them set, there's nothing better or easier for small-diameter cables.
You got that right - it takes me about 15-20 minutes to adjust it for
given kind - maybe 3-4 tries.
When I was actually stripping lots of coax, I wound up buying multiple
casettes that I could adjust for
>
> Virtually all crimp connectors for RG400 or RG142B are going to be a
> three-level strip/prep. The distances for each level are going to vary from
> connector to connector. As such, it behooves one to standardize one a
> particular manufacturer/model of connector, and set up the strip tool for
> that particular model. Either that, or plan on buying and configuring a
> separate tool for each model.
Last time I checked, they actually sell preconfigured stripping
cassettes for common cable/connector combinations.
More information about the TowerTalk
mailing list