[TowerTalk] Fwd: Re: rack for aluminum tubing

[jimlux]

-------- Forwarded Message --------
Subject: Re: [TowerTalk] rack for aluminum tubing
Date: Sun, 23 Sep 2018 18:09:45 -0700
From: jimlux <jimlux at earthlink.net>
To: Jeff Blaine <KeepWalking188 at ac0c.com>

On 9/23/18 5:19 PM, Jeff Blaine wrote:
> Looking for ideas on a rack system to hold aluminum tubing.
> 
> I have reciently put up a building and have a length of wall for
> it but can't think of a great way to organize the tubing.  Like to build 
> some
> sort of wood rack(s) thing that would serve the purpose.
> 

Heavy duty shelf brackets (the ones that fit into a double row of slots 
on a vertical support).
Screw the verticals to the studs.
Put 12" or 16" brackets on. Done.

Lay the tubes across the brackets.

If you have lots of short stock, get those wire shelves like people use 
in laundry rooms and put those on the brackets.  Mount them upside down, 
so what's normally the turned down edges turns up to make a sort of 
trough to keep the tubes from rolling off.