[TowerTalk] Fw: T2X terminal strip connection

[Bob K6UJ]

  The two bigger wires, black and white, should go to terminals 1 and 2.  Other than that it doesn't make any  difference, just make sure they go to the matching number on the terminal strips on the rotor and the control box. 

Here's how my T2X is wired:
1.  black  #18 gauge       2.  white  #18 gauge        3.  green  #22 gauge        4.  blue #22 gauge5.  orange  #22 gauge    6.  yellow #22 gauge        7.  brown #22 gauge        8.  red  #22 gauge
73,BobK6UJ


      From: Dave Thompson <thompson at mindspring.com>
 To: towertalk at contesting.com 
 Sent: Tuesday, September 25, 2018 1:35 PM
 Subject: [TowerTalk] T2X terminal strip connection
  
Hello gang.

It has been years since I hooked up a T2X and using Beldon cable with 2 big wires and 6 smaller wires I tried to remember the proper connections.  I have two manuals and there is nothing in the manuals.  Here is what I used:

1  Big white
2 black
3 yellow
4 brown
5 Big orange
6 green
7 red 
8 blue

Let me know if this is correct.

73 Dave K4JRB

 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk