[TowerTalk] Slightly off-topic

Marsh KA5M marsh at ka5m.net
Fri Feb 8 12:51:14 EST 2019


Do you have the chassis of the FT-1000MP, Bencher "XZ-2" audio filter, rotator control box, and Astron PS all bonded together with a heavy braid conductor this is connected to your station  ground? 

Marsh, KA5M


-----Original Message-----
From: TowerTalk <towertalk-bounces at contesting.com> On Behalf Of Brad Anbro
Sent: Friday, February 8, 2019 9:53 AM
To: towertalk at contesting.com
Subject: [TowerTalk] Slightly off-topic

​Hello all,


I have a problem which has me completely baffled. I am attempting to use

a Bencher "XZ-2" audio filter, in conjunction with my early-model Yaesu

FT-1000MP. When I move my HF antennas with the control box that powers

a Tailtwister rotator, I get a very loud 60-Hz hum in my headphones. Even

when I only depress the brake release lever on the control box, it still

produces a hum.


So far, I have tried electrically isolating the grounds for both the rotator

control box and the Astron DC power supply, which supplies DC power to

the audio filter (and other devices). None of this has helped.


I have found that if I plug my headphones directly into the headphone jack

of the HF rig, there is no hum whatsoever. I am guessing that the 60 Hz

AC is coming into the audio filter through the DC power supply cord. If

this is actually the case, I don't know what to do about it to solve the

problem.


Any ideas or help with my problem would be most welcome. Thank you!


73,

Brad Anbro, N9EN

Bluff City, Tennessee

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk at contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



More information about the TowerTalk mailing list